CATEGORY:

Force & Torque

Filter results by:
image description

SEPARATE SENSOR DIGITAL FORCE GAGUGE eZT series

IMADA

view
x

View PDF Download PDF
View Demo
One amplifier for use with various load cell without any adjustment. Loadcell types: Compression, Tension, Torque and more. Accuracy : +/- 0.2% F.S. Sampling Rate : 2000 times / second Unit of Measurement:  N, kN, kgf, lbf N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in
Add to Enquiry
Buy Now
image description

Customized Test Stand

IMADA

view
x
image description

TENSION GAUGE

CORREX

view
x

View PDF Download PDF
View Demo

Simple operation, easy handling

The Correx Tension Gauge allows easy measurement of small mechanical forces. It generates a counter force with the feeler tip, until the subject is raised or takes the desired measuring position. The maximum indicator remains at the last highest power that has been achieved and can be read subsequently.

The feeler arm must always be at right angles to the direction of the force. The measurements can be made in both directions – clockwise and anti-clockwise.

Typical testing and checking include:

  • Controls with adjustable frictional torque
  • Spring tension in micro switches and all types of relay contacts
  • Contacts etc. in motor vehicles
Round tips or Flat tips is available. Made in Switzerland
Add to Enquiry
Buy Now
image description

Electric Screw Driver Torque Tester

CEDAR

view
x

View PDF Download PDF
View Demo
The best for everyday check of an electric driver Wide measurement range (0 - 8000digit) Can measure without inversion Rolling-back work efficiently by OW joint (PAT.P). Change of Measurement Unit Can be Performed Data Output is USB Form (B Type). Memory Data are 800 Affairs Real-time Output is Every 1 / 180 Seconds.
Add to Enquiry
Buy Now
image description

CD-10M Electric Screw Driver Torque Tester

CEDAR

view
x

View PDF Download PDF
View Demo
Management of electric screw driver Suitable for daily check on electric driver and torque tools. Measurement unit selection (N.m, kgf.cm & lbf.in), Memory data, Real time output 1/180 seconds. Capacity : 100kgf.cm, 10N.m or 90lbf.in
Add to Enquiry
Buy Now
image description

CD-100M Electric Screw Driver Torque Tester

CEDAR

view
x

View PDF Download PDF
View Demo
Management of electric screw driver Suitable for daily check on electric driver and torque tools. Measurement unit selection (N.m, kgf.cm & lbf.in), Memory data, Real time output 1/180 seconds. Capacity : 10kgf.cm, 1.0N.m and 9.0 lbf.in
Add to Enquiry
Buy Now
image description

Torque Wrench & Drivers Tester

CEDAR

view
x

View Demo
Manage various torque wrench and drivers Mode : Peak, Track, Peak break & Real-time output Able to set the torque value with buzzer spound or LED
Add to Enquiry
Buy Now
image description

Motorised Test Stand

ATTONIC

view
x

View PDF Download PDF
View Demo
Motorised Vertical Test Stand, it is small, light-weight and low price in the field of Motorized type. The operating part was reinforced, and the minor change was done for smooth mechanism to decrease swinging more. Movement at maximum speed is enabled by pushing “high speed button” while operating, and repeated operation is improved.
  • It is push-pull load measuring stand up to 500N (50kg)
  • Size 520(L)x250 (W)x350 (H)mm
  • Weight about 30kg
  • Maximum Stroke 125mm
  • Pitch Travel 10-100mm/min
Add to Enquiry
Buy Now
image description

Manual Test Stand

ATTONIC

view
x

View PDF Download PDF
View Demo
Manual vertical load measuring stand, It is small, light-weight and low price. The operating part was reinforced, and the minor change was done for a smooth mechanism to decrease swinging more. The height of the table was lowered, and long-time measurement was enabled at the desk-top. It is push-pull load measuring stand up to 500N (50kg).
  • Size : 470(L) x 245 (W) x 350 (H) mm
  • Weight about 22kg
  • Maximum Stroke 150mm
  • Pitch Travel 2.0mm / 1 rev.
Add to Enquiry
Buy Now
image description

Digital Torque Tester

CEDAR

view
x

View PDF Download PDF
View Demo
Manage the electric screwdriver /manual torque driver and wrench. This is the new standard "WDI series"
  • Easy-to-understand color display.
  • 10HR / 100HR is capable of high-resolution measurement with 1/10 the normal resolution.
  • Equipped with data output via USB / RS232C.
  • Clear signals and various commands can be sent from a personal computer or PLC.
  • Measurement joints can be selected according to the management method and tool characteristics.
  • Manual tool measurement jig A screw cube is attached according to the measurement band.
  • A storage case is available as an option.
Add to Enquiry
Buy Now