CATEGORY:

Analytical & Environmental

Surface Profile

Filter results by:
image description

Surface Roughness and Contour Measurement - Hybrid

MITUTOYO

view
x

View PDF Download PDF
View Demo
FORMTRACER Avant Series Surface Roughness Tester
FORMTRACER AVANT Series is a Contour and Surface Roughness Measuring Systems. Just by integrating a detector with a base system comprising FTA-S4C3000/4000 (contour instrument) and FTA-S4S3000 (surface roughness tester), it is possible to upgrade a contour instrument or surface roughness tester to a complex system, from a general-purpose contour instrument to a high-precision contour instrument. Features
  • FORMTRACER Avant Series boast best-in-class drive speed, such as fast movement of drive unit and column, stroke (retraction) speed-up, etc. To meet the needs of “Speed-up,” on surface roughness measurement, the positioning distance from the start of measurement to the start of data acquisition is reduced to the limit, while on contour measurement, the time from touch-down on a workpiece to the start of measurement is shortened. The total measurement time is drastically reduced to improve measurement efficiency.
  • This system uses a cable-less design allowing measurements without having to worry about snagging unprotected detector cables, while the drive section is an X-axis inclinable drive unit. The inclination range is a wide ±45°, allowing inclined surfaces on of workpieces to be simply measured without using an inclination jig. In addition, the detector can be replaced without turning power off, the guide pin reproduces positioning with high accuracy, and the software supporting the mounted detector starts up automatically. Such outstanding features drastically improve work efficiency.
  • The upper/lower surface continuous measurement feature, performing control of measurement direction and measuring force by double-sided stylus and software, remarkably improves the measurement range. The stylus-drop detection feature immediately stops operation if the stylus suddenly drops, thus preventing damage to the stylus during continuous cut-out measurement without having to rely on a conventional mechanical stop. Other features enable accurate and safe measurements in accordance with the characteristics of a workpiece.
 
Add to Enquiry
Buy Now
image description

Leap ST - Handheld 3D Scanner

FARO

view
x

View PDF Download PDF
View Demo
A Leap Forward in Handheld Scanning for Manufacturing and 3D Metrology Applications. Benefits: Accurate results, less time with less delay. Scan Faster with maximum versatility. HIGHLIGHTS • Ensure reliable measurement with the versatility to select from five operating modes • Accelerate inspection without sacrificing accuracy • Inspect more parts without increasing your cost-of-quality • Catch more defects to reduce scrap and maximize production uptime • Gather more data on production process trends to optimize quality Specifications Scan Mode Ultra-fast Scanning 34 blue laser lines Hyper Fine Scanning 7 blue parallel laser lines Large-area Scanning 11 parallel infrared laser lines Deep Hole Scanning 1 blue laser line Volume Accuracy Work Alone* 0.015 mm + 0.030 mm/m (0.0006 in + 0.00036 in/ft) Work With 1 m Reference Bar* 0.015 mm + 0.020 mm/m (0.0006 in + 0.00024 in/ft) Photogrammetry System Scanning Area 3760 mm x 3150 mm (148.0 in x 124.0 in) Depth of Field 2500 mm (98.4 in) * Based on the VDI/VDE 2634 Part 3 standard Technical Specifications Accuracy Up to 0.020 mm (0.0008 in) Scanning Rate up To 4,150,000 measurement/s Scanning Area up To 1440 mm x 860 mm (57.0 in x 33.9 in) Laser Class CLASS II (eye-safe) Resolution up To 0.010 mm (0.0004 in) Stand-off Distance 300 mm (11.8 in) Depth of Field up To 925 mm (36.4 in) Output Formats .asc, .igs, .txt, .stl Operating Temperature Range Minus 10˚ C - 40˚ C (14˚ F - 104˚ F) Interface Mode USB 3.0  
Add to Enquiry
Buy Now
image description

TESTEX DIGITAL MICROMETER

DEFELSKO

view
x

View PDF Download PDF
View Demo

Testex Digital Micrometer Thickness Gage

The Testex Digital Micrometer makes using Testex Replica Tape even easier. It is custom-deigned to be the optimal tool for measuring replica tape, and makes taking measurements and creating reports easier than ever.

Easy to Use

  • Bright, high-contrast digital color display with large numerals for easy viewing in bright or dark environments
  • Measures in both Microns and Mils
  • Built-in memory for up to 250 readings with on-screen statistics. View and download measurements on any computer using the included USB cable. No software required.
  • Durable, all-metal housing
  • Powered by a single AAA battery
Add to Enquiry
Buy Now
image description

Coefficients of Friction Testing System

IMADA

view
x

View PDF Download PDF
View Demo
Designed for coefficients of friction (COF) test of film and paper Automatically calculates Static and Ave. Kinetic COF by the supplied software Complies with a part of ISO and JIS standard -ISO 8295:1995 Plastics -Film and sheeting-Determination of the coefficients of friction (Partly) (When COF2-2N or COF-2N-V is used) (Corresponding Japanese standard: JIS K7125:1999) -JIS P8147:2010 Paper and board-Determination of the static and kinetic coefficients of friction (Partly) (When COF2-10N orbCOF-10N-V is use    
Add to Enquiry
Buy Now
image description

Gloss Meter CS-380 Triple Angle

CHNSpec

view
x

View PDF Download PDF
View Demo
Triple Angle Gloss Meter CS-380, High-Precision Surface Glossmeter Tester, 0-2000GU, Measure the gloss on a test surface at 3 different angles: 20°, 60°, 85°. For Paint, Leather, Plastic, Metals, Ceramics, Tile. High Precision
  • Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure highly precise of the measured data.
  • Our gloss meters conform to JJG 696 standard for first class gloss meters. Every instrument has verification certificate from National Modern Metrology and Instruments Testing Laboratory and the Education Engineering Ministry in China.
  • Test Mode: Single, Standard and Sample Testing
  • Large Battery Capacity
    • We fully utilized every space of the device and especially custom made advanced high-density lithium battery in 3000 mAh, which ensures continuous testing for 54300 times.
Made in China - Quality Assurance!
Add to Enquiry
Buy Now
image description

Gloss Meter CS-300 Single Angle

CHNSpec

view
x

View PDF Download PDF
View Demo
Single Angle Gloss Meter CS-300, High-Precision Surface Glossmeter Tester, 0-1000GU, For Paint, Leather, Plastic, Metals, Ceramics, Tile. High Precision
  • Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure highly precise of the measured data.
  • Our gloss meters conform to JJG 696 standard for first class gloss meters. Every instrument has verification certificate from National Modern Metrology and Instruments Testing Laboratory and the Education Engineering Ministry in China.
  • Large Battery Capacity
    • We fully utilized every space of the device and especially custom made advanced high-density lithium battery in 3000 mah, which ensures continuous testing for 54300 times.
Made in China - Quality Assurance
Add to Enquiry
Buy Now
image description

Color Spectrophotometer DS-620

CHNSpec

view
x

View PDF Download PDF
View Demo

Touch Screen Display Spectrophotometer, Electronic Portable Color Spectrophotometer, SCI Measuring Portable Color Spectrophotometer

Measurements Structure: D/8,SCI+SCE Repeatability: dE*ab≤0.03 Display Accuracy: 0.01 Illumination Aperture: Φ8mm/Φ11mm; Φ4mm/Φ6mm; 1*3mm Light Source: LED + UV Observation Method: Camera            

Add to Enquiry
Buy Now
image description

Spectrophotometer - Color Meter DS-700D

CHNSpec

view
x

View PDF Download PDF
View Demo
Portable Spectrophotometer DS-700D, High Precision Colorimeter Color Difference Tester. Color Meter For Plastic, Textile, Pigment, Paint, Print, etc. Geometry : d/8, SCI+SCE   1) Excellent repeatability and inter-instrument agreement repeatability : dE*ab≤ 0.04 (max.) and inter-instrument agreement : ≤0.25 Test result is accurate and reliable to ensure the consistency of the measurement data of multiple devices, which can be used for color matching and accurate color communication. 2). Dual optical path highprecise CMOS array sensor The dual optical path design monitors the energy fluctuation of the light source while measuring the sample signal, reduces interference during the measurement, and obtains better measurement repeatability. The usage of large-area dual-array sensors provides higher spectral response sensitivity, and ensures fast measurement speed, accuracy, stability and consistency between multiple devices. 3). Intelligent auto calibration, white tile is made by ZrO2with reflectance more than 90%, no need for frequent whitecalibration. The instrument is placed on the intelligent calibration base, and the instrument can be automatically calibrated without manual intervention through the whitetile on the base. It has changed the current situation that traditional instruments must be manually calibrated with whitetile. The whitetile is made by ZrO2 with reflectance more than 90%, which ensures excellent mechanical strength and weather resistance, and will not be scratched or discolored after long-term use. 4). 360-700nmFull Wavelength Balanced LED+UV The instrument adopts a fullwavelength balanced LED and UV as the illuminant, ensuring sufficient spectral distribution in the visible and ultraviolet bands, and materials with fluorescent can also be measured.
Add to Enquiry
Buy Now
image description

DIGITAL MICROSCOPE 1600A

PREMIUM

view
x

View PDF Download PDF
View Demo
PMBHM-1600A    USB Digital Microscope  Feature: * A good quality to use in Inspection dissection/examination, Plant dissection/examination, Skin examination, * Scale examination, Textile Inspection, Jewelry Inspection, Collections/Coin Inspection, Printing Inspection, PCB or PCBA Inspection and so on. * The microscope is made up of high-quality IC and electronic components, with clear image quality, low power consumption, high-resolution, applies to small objects to be larger * Photo and video is the best choice of small objects reorganization.
Add to Enquiry
Buy Now
image description

Tesla Meter Probe

KANETEC

view
x
image description

KANETEC

view
x

View PDF Download PDF
View Demo
Probe for TESLA METER Please keep this probe as a spare. It can be replaced without troublesome calibration. In addition to the standard PRB (transverse type), an axial type (AXL) capable of vertical measurement and having high durability. This Probe is an optional accessory from the standard.  
Add to Enquiry
Buy Now
image description

DC Holiday Detector Verifier

DEFELSKO

view
x

View PDF Download PDF
View Demo
Ideal for field/laboratory verification of pulse DC holiday detectors SIZE: 43 x 5 x 5 cm, (17" x 2" x 2")
WEIGHT: 476 g (1.05 lbs.) EASY OPERATION
Step 1. Ensure that the ground lead is plugged into the PosiTest HHD
Verifier and that the other end of the ground lead is connected to the
ground lead of the high voltage holiday detector that is being verified. Step 2. Turn the PosiTest HHD Verifier on by pressing and releasing the
power button. Once powered on, the verifier continuously monitors
the voltage on the probe end of the verifier. The verifier will update
the display when the probe is touching an exposed electrode of a
holiday detector. The voltage displayed on the verifier should match
the voltage displayed by the detector within the combined tolerance
of both units.
Verifier
Add to Enquiry
Buy Now