CATEGORY:

All Categories

image description

DIGIMETRONIPD-P510

CITIZEN

view
x

View Demo
Digimetron A remote control-type displacement sensor is a length measuring system in which the travel distance of a straight-running spindle or feeler is detected photoelectrically and displayed as a digital value. It does not have any mechanism for converting a linear displacement into an angle of rotation, unlike an analog digital gauge. So, it can provide a highly accurate measured value in the entire measuring range. Furthermore, since the display section and the detector section can be installed at places apart from each other, the displacement sensor can be used as installed in a machine. If the specifications of the display are selected, DIGIMETRON can respond to various measurement needs, such as simple measurement, sum or difference computation, peak-to-peak value measurement, and three-rank sorting.
  • 8φmm, slim-body design to save space and enable flexible configuration.
  • Since origin detection mechanism loaded, eliminates to readjust whenever power is turned off.
  • A nut installed type is available in order to solve the problem of over-tightening the stem portion.
  • In compliance with IP67 degree of protection and EMC directives on CE marking.
Add to Enquiry
Buy Now
image description

DIGIMETRONIPD Series

CITIZEN

view
x

View Demo
DIGIMETRON (IPD SERIES COUNTER) All models equip fault detection functionality. Functions such as 7-rank sorting function and peak measuring function. Designed to meet the EMC Directive and the RoHS Directive. BCD output and RS-232C output models available. Small size DIN (48 x 48 mm) LCD with 6 digits and polarity, mode display and two color backlight Resoltion : 0.1/1.0/10.0 um (Can be switched depending on the setting)
Add to Enquiry
Buy Now
image description

ELEMETRONDTH series

CITIZEN

view
x

View PDF Download PDF
View Demo
ELEMETRON DETECTORS Light measuring force useful for workpieces High Sensitivity and high Accuracy Use on wide range of measurement A variety of detectors in response to all measuring conditions. Very suitable for measurement requiring reading in 0.1 μm, measurement requiring a low measuring force
Add to Enquiry
Buy Now
image description

ELEMETRONDTM series

CITIZEN

view
x

View PDF Download PDF
View Demo
ELEMETRON Amplifiers Analog or Digital indication type Graduation: 0.2 μm or 0.1μm Sensitivity selectable 12 or(3 ranges) Peak measurement, rank sorting, and sum or difference computation can be effected as standard features. Use of the optional I/O interface enables expansion, including BCD output and RS-232C output.
Add to Enquiry
Buy Now
image description

TRI-METRON

CITIZEN

view
x

View PDF Download PDF
View Demo
Tri-Metron A signal indicator with electric contacts installed in a microindicator can deliver signals for distinguishing measured states in 3 ranks or 5 ranks. Signal indicators are widely used not only in watch production lines but also in production lines of automobile engines, bearings, etc., to allow automatic inspection and sorting.
Add to Enquiry
Buy Now
image description

TENSION GAUGE

CORREX

view
x

View PDF Download PDF
View Demo

Simple operation, easy handling

The Correx Tension Gauge allows easy measurement of small mechanical forces. It generates a counter force with the feeler tip, until the subject is raised or takes the desired measuring position. The maximum indicator remains at the last highest power that has been achieved and can be read subsequently.

The feeler arm must always be at right angles to the direction of the force. The measurements can be made in both directions – clockwise and anti-clockwise.

Typical testing and checking include:

  • Controls with adjustable frictional torque
  • Spring tension in micro switches and all types of relay contacts
  • Contacts etc. in motor vehicles
Round tips or Flat tips is available. Made in Switzerland
Add to Enquiry
Buy Now
image description

Uncured Powder Coating Thickness Gage

DEFELSKO

view
x
image description

Coating Thickness Gage

DEFELSKO

view
x
image description

Coating Thickness Standards

DEFELSKO

view
x

View PDF Download PDF
View Demo
Certified Coated Metal Plates and Polystyrene Blocks Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage Ideal for use in the calibration lab, in the field or on the factory floor Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration Certified and labeled in both Metric and Imperial units
Add to Enquiry
Buy Now
image description

Magnetic Coating Thickness Gage

DEFELSKO

view
x
image description

Plastic Shims

DEFELSKO

view
x

View PDF Download PDF
View Demo
Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy Each shim is packaged in its own protective plastic pouch Certificate of Calibration showing traceability to NIST is included with each shim or set of shims Certified and labeled in both Metric and Imperial units
Add to Enquiry
Buy Now
image description

PosiPen®

DEFELSKO

view
x

View PDF Download PDF
View Demo
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Used for:
  • Small, hot or hard-to-reach surfaces
  • Spot Checks - conveniently fits in a shirt pocket
  • Hot Sprayed Coatings
Add to Enquiry
Buy Now