Brand:

ERNST

Filter results by:
image description

AT-130 Rockwell Hardness Tester

ERNST

view
x

View PDF Download PDF
View Demo
Rockwell principle DIN and ASTM E18. Easy operation and 3 sec measurements Large Stand provide big parts measurements Rockwell Model or Rockwell Superficial Model available Rockwell Scales : HRC, HRB, HRA, HB30 and more HR available Superficial Scales : HR15N, 30N,45N, HR15T, 30T, 45T Selectable Stand : NX, TX , CAR and MUR
Add to Enquiry
Buy Now
image description

Hardness Tester NR3D

ERNST

view
x

View PDF Download PDF
View Demo
Rockwell principle DIN and ASTM E18. also reading Brinell HB30 standard scales HB10/5 for aluminium and light alloys. NR3D for small and medium dimension Low cost and realiable quality. Rockwell Model or Rockwell Superficial Model avaliable
Add to Enquiry
Buy Now
image description

20X LIGHT MICROSCOPE (Brinell)

ERNST

view
x

View PDF Download PDF
View Demo
Antares is the new ERNST 20X light microscope for BRINELL reading. 6 mm long scale - 0.05 mm graduations.Suitable for checking of mechanical components. The built-in leds provide an excellent and even illumination of the Brinell indentation's edge, avoiding that ambient light reaches the impression and disturbs the reading. In this way, accurate and reliable results are ensured in any situation. Rugged aluminium housing provides durability and great efficiency up to 50 hours continuous operation without replacing the battery (a lamp on the main body indicates that light is on). The scope is delivered complete with ring for improve stability during testing and with stainless steel base for testing in tight locations.
Add to Enquiry
Buy Now
image description

DIGITAL MICROSCOPE (Brinell)

ERNST

view
x

View PDF Download PDF
View Demo
Digital Brinell microscope all these problems allowing quick, automatic, and accurate readings with no operator influence on the measurement. The magnified indentation on the screen also permits detection of any defect in the surface finish or the indentation.
Add to Enquiry
Buy Now
image description

Lite - Miniaturised Portable Rockell Hardness Tester

ERNST

view
x
image description

WIRELESS PORTABLE HARDNESS TESTER

ERNST

view
x

View PDF Download PDF
View Demo
Rockwell principle of preload and test load with static load Operate with all kinds of material without changing indenter Can work with stand to have very consistent measurement Standard scales : HRC, HRB, HB30, N/mm², HV, DPTH ASTM E-18, ISO 6506/6507/6508 & DIN 50157
Add to Enquiry
Buy Now
image description

WIRELESS PORTABLE HARDNESS TESTER (e-dynatest)

ERNST

view
x

View Demo
Portable miniaturised Rockwell Hardness Tester Applying Rockwell principle Preload 7kgf and full Load 100kgf (981N) Standard scales : HRC, HB30, N/mm² It develop a dynamic system, which radically differs from known. ASTM-E18, ISO6506/6507/6508 & DIN50157
Add to Enquiry
Buy Now
image description

WIRELESS PORTABLE HARDNESS TESTER (e-handy)

ERNST

view
x

View PDF Download PDF
View Demo
Handy Esatest X operates according to the ERNST patented ESATEST® principle of hardness determination through electrical resistance. The diamond indenter can be compared to a little potentiometer, which, while gradually penetrating into the material, obtains all the data (load-hardness) during the whole phase of load application. ASTM-18, ISO 6506/6507/6508 & DIN 50158
Add to Enquiry
Buy Now
image description

Pin Impact Brinell Portable Hardness Tester - STE/B

ERNST

view
x

View PDF Download PDF
View Demo
Pin Impact hardness tester is designed following the Brinell hardness test method. The test force is controlled by a shear pin. After reading the diameter of the indention with the reading microscope, the Brinell hardness value can be obtained from the look up table. This kind of hammer impact Brinell hardness tester is capable of testing from small to very large specimens. It is especially suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut. The test can be completed in any direction to test the hardness of upper, lower and lateral part of the specimen. Standard scales : HB30, N/mm², kg/mm² Applied force causes penetration of the indenter into surface with a load determined by a calibrated expendable shear pin. Resulting accuracy is comparable to the bench hardness tester
Add to Enquiry
Buy Now
image description

AT-250 ROCKWELL HARDNESS TESTER

ERNST

view
x

View Demo
Loads :
MOD DR: 60kgf, 62.5kgf, 100kgf, 125kgf, 150kgf, 187,5kgf (N 588, 613, 981, 1226, 1471, 1839) MOD DSR: 10kgf, 15kgf, 15.6kgf, 30kgf, 31.2kgf, 45kgf (N 98, 147, 153, 294, 306, 441)
Rockwell Principle
Add to Enquiry
Buy Now
image description

Vickers / Rockwell Hardness Tester MTRX

ERNST

view
x
image description

Brinell Automatic Hardness Tester

ERNST

view
x

View PDF Download PDF
View Demo
Brinell Automatic Hardness Tester In accordance with ISO EN 6506, ASTAM E10 standard. Suitable for bulky parts up to 1200mm height, Easy to use and best for lab test. Turret with automatic selection of indenters and lenses according to the test method.
Add to Enquiry
Buy Now