Guarantee Flawless Adhesion with the 50x50mm PosiTest Kit

Installing ceramic tiles on commercial facades or heavy-traffic floors requires an unbreakable adhesive bond. If a tile mortar fails, loose pieces create massive safety hazards and expensive replacement liabilities. The specialized 50x50mm Tile PosiTest kit offers the perfect solution to measure the exact tensile bond strength of your cementitious adhesives accurately.

Why Commercial Inspectors Choose the Square Kit Format

International tile testing standards demand specific square dimensions to evaluate thin-set mortars correctly. This kit includes the exact 50x50mm square dollies and matching standoffs required to isolate your test area perfectly.

Key design advantages include:

• Full EN 12004 Compliance: The kit components perfectly meet European and international standards for interior and exterior tile adhesives.

• Precision Leveling Standoff: The square internal opening centers the hydraulic pulling force directly over the tile to prevent crooked, uneven snaps.

• High-Force Capacity: The heavy-duty hydraulic actuator delivers smooth pulling pressure up to 10,000 Newtons easily.

• Unified Digital Tracking: Store your pull rates, peak force values, and exact failure types inside the internal memory system.

50x50mm Kit Operational Parameters

Verify your project specifications against the capabilities of this professional masonry inspection kit.

Kit Feature	Maximum Force	Target Standards	Primary Material Use
50x50mm Square Setup	10 kN / 2200 lbs	EN 1348 / EN 12004	Ceramic Tiles, Marble, & Mortars

Achieve Perfect Field Documentation

Operating this electronic system requires minimal setup time. Score around your target tile down to the substrate, glue the square aluminum dolly in place, and connect the quick-coupling actuator.

Pro Tip: Apply your adhesive glue evenly across the entire 50x50mm surface area to prevent early edge cracking during the pull test.

Secure your project quality approvals with certified equipment. Explore our complete 50x50mm Tile PosiTest kit inventory today to eliminate tile installation failures!

The PosiTest AT 50 mm x 50 mm Tile Kit is designed to measure tensile strength of ceramic tile cementitious, dispersion and reaction resin adhesives in accordance with BS EN 12004-2.