Explore Our Products

SK - Pin Gauges



You May Also Like



If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.

SK PIN GAUGES - INDIVIDUAL

The pin shape according to fixed size precisely.
Measure and inspect the diameter of small holes,
A test bar for geometric deviations measurements.
Tolerance : +/- 0.001 or 0.0005mm can be achieve.
Made in Japan

ENQUIRY
SK PIN GAUGES SET - STEEL PG SERIES

Sub-zero treatment (Cryogenic hardened)
Tolerance + or - 2µm to 5µm based on nominal size
Range from 0.1mm to 19mm in step of 0.1, 0.01 & 0.025mm
Hardness HV650
SK

ENQUIRY
SK PIN GAUGES SET - STEEL SPA SERIES

Sub-zero treatment (Cryogenic hardened)
Tolerance +/- 1µm
Range from 1mm to 10mm in step of 0.01mm
Hardness HV650

ENQUIRY
SK RUN OUT GAUGE - ROG System

Enables easy concentricity measurements using test indicator.
Wide Selection of Base Length, rollers and carrier.
Provide 2um maximum accuracy.
A fine angle adjustment carriage to offer easy Zero setting.
Equipped with "work stopper" that stops the movement during measurement.
Factory specification can measure diameter not more than 45mm.

ENQUIRY
SK Circular Taper Gauges - TPG-710

Measure hole size or gap width
Steel for machine structural use.
Grip : free cutting steel

ENQUIRY
SK Digital Angle Meter - Compact SKBB-180A

Precision angle measurement and working reference for assembly of
machinery, tooling, jigs, etc.
Magnetic base
In Relative Mode, Zero-point can be set at any position.
Origin can be set and stored for use in Absolute Mode.

ENQUIRY
SK DIGITAL LEVEL - LEVELNIC

High accuracy Level with Simple & Clear Operation
Worlds first Digital Level with built-in Microcomputer
Easy to Fix the Datum point,Divide measurement
value into halves with one-touch operation

ENQUIRY
SK DIGITAL S-LINE TEST INDICATOR (IP65)

FEATURES
● IP65 rating electronic digital test indicator. Electronics are protected against dust and water.
● The display has both digital and analog display for easy reading
● Display rotates 360° for setting zero
● MIN, MAX measurement function
● Measuring direction (+or -) switching function
● Preset function
● Auto power off function (after 2 hrs.)
● Selectable minimum reading display: 0.01mm/0.001mm
POWER
● One CR2032 (Lithium) battery included for testing
ACCESSORIES
●φ 8mm dove tail stem

ENQUIRY
SK PROTRACTOR - SK19

Length 90 x 1.2mm
Scale : 180 x 1 deg.
Made in Japan

ENQUIRY
SK RING GAUGE - STEEL

Sub-zero treatment (Cryogenic hardened)
Use Ring Gauge as master gauge for "0" adjustment
of measuring tools such as bore gauge, inside micrometer,
dial caliper, etc.

ENQUIRY
SK TAPER GAUGES

Measurement of groove and gap etc.
Machine grade carbon steel (S55C, not hardened
Use the thickness of taper to measure the gap width
Packed in plastic carrying case
Accuracy +/-0.04mm
Satin Finish

ENQUIRY