Explore Our Products

Mitutoyo - Dial Test Indicator

You May Also Like

If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.


Allows large diameter cylinders or holes to be centered on a machine tool.

Mitutoyo CONTACT POINT for Dial Test Indicator

Selection of ball diameter : 0.5, 0.7, 1.0, 2.0 & 3.0mm
* Stylus length affects the scale factor of an indicator

Mitutoyo DIAL TEST INDICATOR - Full set

Full set comes with :
a) Swivel Clamp for height gage
b) Holding bar for height gage
c) 2 stem size for different application
d) 2 diameter size contact point

Mitutoyo DIAL TEST INDICATOR - Horizontal Type

Designed to probe surfaces that cannot be reach by dial indicator
Clear and concise wide dial face allows execellent visibility
Compact type

Mitutoyo DIAL TEST INDICATOR - Pocket Type

Pocket type
Reversible measuring direction (Clutch type)
Stylus is adjustable within 220°

Mitutoyo DIAL TEST INDICATOR - Universal Type

Universal type
Adjusted 360° without moving the indicator

Mitutoyo DIAL TEST INDICATOR - Vertical Type

Horizontal 20 tilted face


Allows the indicator to be set at the desired attitude to the workpiece

Mitutoyo CRYSTA - Apex EX Series

5 axis capability creates an amazing new standard for measurement excellence. 5-axis design offers a choice of highly productive measurement methods, including “head touch” for point measurement by moving the probe head only in two axes, and high speed 5-axis touch trigger scanning.
The CRYSTA-Apex EX 500T/700T/900T series are CNC CMMs equipped with the PH20, 5-axis control touch-trigger probe.
• 5-axis operation reduces the time required for probe orientation movements and allows more flexible positioning. This also ensures easy access to complex work pieces and saves time both during programming and measurement.
• In addition to 3-axis point measurement similar to conventional coordinate measuring machines, the PH20 probe head also supports 'head touch' operation for quick point measurement using the two rotational axes of the probe only, with no movement required along the CMM axes.
• PH20 incorporates a TP20 probe and allows use of modules designed for the TP20. Automatic probe changeover with a module changer is also supported.
• Even without the workpiece to be measured, a measurement program can be created on a PC using 3D CAD data. Compared to joystick operation, this makes for more efficient programming and also allows interference checking

Mitutoyo Crysta-Apex S 500/700/900/1200 - Standard CNC CMM

High accuracy in the 1.7μm class
The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.
*ISO 10360-2:2009


0.1µm resolution measurement
Rigid frame and high performance constant force mechanism
Measuring force 7N to 9N

Mitutoyo MACH-3A 653 Series 360 In-line Type CNC CMM

CNC CMM (Horizontal type) incorporating the CMM controller and the host computer in the main unit results in a compact spacing saving footprint for the shop floor. This series is designed for 24 hour operation resulting in stable operation and remarkable durability.
Range X-23.62" (600mm), Y-19.68" (500mm) & Z-11.02" (280mm)

Mitutoyo STRATO-Apex 500/700/900 Series 355-High Accuracy CNC CMM

The STRATO-Apex series is high-accuracy CNC CMMs achieving 0.9μm for the first term. The series guarantees high accuracy and also high moving speed and acceleration achieved with improved rigid air bearings on all axial guideways. The scale systems on Mitutoyo high-precision models utilizes a high-performance linear encoder (manufactured by Mitutoyo), for detecting axis position. In addition, various technologies have been utilized in the structure, part processing, and assembly to provide high accuracy measurement .

Mitutoyo Styli and Accessories (CMM)

A wide range of contact and non-contact probes enables numerous kinds of measurement to be performed, all backed up by comprehensive analysis software for interpreting measurement results in the timely manner so essential for keeping up with today’s fast-paced production.


Digital axis Counter and Projector readout counter
to facilitate dimensional and angular measurement
3 lens turret model with 10X standard magnification
Optional 5X, 20X, 50X & 100X lens
High accuracy stage

Mitutoyo CMM Fixtures

Mitutoyo offers you the full range of CMM equipment from the machine itself to probe systems, software up to clamping systems.

The Fixture series “eco-fix” offer you:
a quick, easy & flexible way to create fixtures,
practice-oriented modular concept,
time and cost-saving way to buit fixtures,
easy adaption of product changes to the fixtures,
leight-weight aluminium parts,
strong, hardcoated and anodised parts for long life under rough conditions.