Explore Our Products

Mitutoyo - Reference Gages

You May Also Like

If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.

Mitutoyo BENCH CENTERS 967 series

The bench center provide precision measurement
for concentricity on cylindrical workpieces
With an indicator clamp of stem diameter 8mm


• The Calibration Tester is specially designed to
calibrate short range dial indicators, dial test
indicators, and electronic gage heads.
• Universal bracket accepts any dial indicator,
dial test indicator or electronic gage without
any additional accessory.
• Clamping capacity: ø4mm to ø10mm

Mitutoyo CALIPER CHECKER - CERAMIC 515 series

Enable efficient setting and inspection of caliper and height gages


Designed to check accuracy of table movement of machine tools and calibrate CMM
Can used in either vertical or horizontal

Mitutoyo CHECK MASTER 515 series

Designed to check accuracy of table movement of machine tools and calibrate CMM
Can used in either vertical or horizontal

Mitutoyo COMBINATION SQUARE SET - 180 series

Three heads are attachable to the stainless steel rule (Blade)
allowing versatile measrements on various types of workpieces


Designed to check and help set the range end points of a depth micrometer


Can be attached to height gages using a gage holder
Setting preset value
Removable blade


Length standard provides by MITUTOYO
Wide selection of gauge block sets and individual size
Selected grade 00, 0, 1, 2 for different application

Mitutoyo "NEW" U-WAVE FIT - Wireless System

U-Wave Fit wireless data transmitter fits to the back of any Mitutoyo hand-held measuring instrument. This new design allows for to fit behind the display resulting in a more ergonomic feel.
Easy data export to Microsoft® Excel® or SPC software applications

Mitutoyo CRYSTA - Apex EX Series

5 axis capability creates an amazing new standard for measurement excellence. 5-axis design offers a choice of highly productive measurement methods, including “head touch” for point measurement by moving the probe head only in two axes, and high speed 5-axis touch trigger scanning.
The CRYSTA-Apex EX 500T/700T/900T series are CNC CMMs equipped with the PH20, 5-axis control touch-trigger probe.
• 5-axis operation reduces the time required for probe orientation movements and allows more flexible positioning. This also ensures easy access to complex work pieces and saves time both during programming and measurement.
• In addition to 3-axis point measurement similar to conventional coordinate measuring machines, the PH20 probe head also supports 'head touch' operation for quick point measurement using the two rotational axes of the probe only, with no movement required along the CMM axes.
• PH20 incorporates a TP20 probe and allows use of modules designed for the TP20. Automatic probe changeover with a module changer is also supported.
• Even without the workpiece to be measured, a measurement program can be created on a PC using 3D CAD data. Compared to joystick operation, this makes for more efficient programming and also allows interference checking

Mitutoyo Crysta-Apex S 500/700/900/1200 - Standard CNC CMM

High accuracy in the 1.7μm class
The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.
*ISO 10360-2:2009


0.1µm resolution measurement
Rigid frame and high performance constant force mechanism
Measuring force 7N to 9N

Mitutoyo MACH-3A 653 Series 360 In-line Type CNC CMM

CNC CMM (Horizontal type) incorporating the CMM controller and the host computer in the main unit results in a compact spacing saving footprint for the shop floor. This series is designed for 24 hour operation resulting in stable operation and remarkable durability.
Range X-23.62" (600mm), Y-19.68" (500mm) & Z-11.02" (280mm)

Mitutoyo MeasurLink - Real Time SPC

MeasurLink® Real-Time
Real-Time Data Collection Module
data collection interface provides real-time graphics for run charts, control charts, histograms and statistics. Standard views include Datasheet (observations and charts), Classic View (chart windows), and 2D view (part images with callouts that include charts and statistical data)along with a customizable Info View and additional Manager views. Full reporting template functionality is also provided.

Mitutoyo STRATO-Apex 500/700/900 Series 355-High Accuracy CNC CMM

The STRATO-Apex series is high-accuracy CNC CMMs achieving 0.9μm for the first term. The series guarantees high accuracy and also high moving speed and acceleration achieved with improved rigid air bearings on all axial guideways. The scale systems on Mitutoyo high-precision models utilizes a high-performance linear encoder (manufactured by Mitutoyo), for detecting axis position. In addition, various technologies have been utilized in the structure, part processing, and assembly to provide high accuracy measurement .

Mitutoyo Styli and Accessories (CMM)

A wide range of contact and non-contact probes enables numerous kinds of measurement to be performed, all backed up by comprehensive analysis software for interpreting measurement results in the timely manner so essential for keeping up with today’s fast-paced production.