Explore Our Products

Mitutoyo - Depth Measurement



You May Also Like



If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.

Mitutoyo DEPTH ATTACHMENT for Caliper

Application for Caliper range up to 300mm

ENQUIRY
Mitutoyo DEPTH GAGE - DIAL TYPE - Back Plunger

Easy to handle in measurement of depth
Back plunger type
with extension rod to increase the range

ENQUIRY
Mitutoyo DEPTH GAGE - DIAL TYPE 7 series

Easy to handle in measurement of depth
with extension rod to increase the range

ENQUIRY
Mitutoyo DEPTH GAGE - DIGIMATIC Hook End Type

The hook sharped allow depth and thickness measurements
Base 250x10mm for range 600 to 1000mm
Base 100x6.5mm for range 0 to 300mm

ENQUIRY
Mitutoyo DEPTH GAGE - DIGIMATIC TYPE 329 Series

Interchangeable rod typeenable wide range measurement
Rod diameter 4mm
Base 63.5x16mm or 101.6 x16mm

ENQUIRY
Mitutoyo DEPTH GAGE - DIGIMATIC TYPE 547 series

Easy to read dial effectively prevents misleading
with extension rod to increase the range

ENQUIRY
Mitutoyo DEPTH GAGE - DIGIMATIC TYPE 571 series

Base 100x6.5mm for range 0 to 300mm
Base 250x10mm for range 600 to 1000mm
IP67 protection

ENQUIRY
Mitutoyo DEPTH GAGE - VERNIER TYPE 527 Seies

Base 100x6.5mm for range 0 to 300mm
Base 250x10mm for range 600 to 1000mm

ENQUIRY
Mitutoyo DEPTH GAGE 129 series

Interchangeable rod typeenable wide range measurement
Rod diameter 4mm
Base 63.5x16mm or 101.6 x16mm

ENQUIRY
Mitutoyo CRYSTA - Apex EX Series

5 axis capability creates an amazing new standard for measurement excellence. 5-axis design offers a choice of highly productive measurement methods, including “head touch” for point measurement by moving the probe head only in two axes, and high speed 5-axis touch trigger scanning.
The CRYSTA-Apex EX 500T/700T/900T series are CNC CMMs equipped with the PH20, 5-axis control touch-trigger probe.
• 5-axis operation reduces the time required for probe orientation movements and allows more flexible positioning. This also ensures easy access to complex work pieces and saves time both during programming and measurement.
• In addition to 3-axis point measurement similar to conventional coordinate measuring machines, the PH20 probe head also supports 'head touch' operation for quick point measurement using the two rotational axes of the probe only, with no movement required along the CMM axes.
• PH20 incorporates a TP20 probe and allows use of modules designed for the TP20. Automatic probe changeover with a module changer is also supported.
• Even without the workpiece to be measured, a measurement program can be created on a PC using 3D CAD data. Compared to joystick operation, this makes for more efficient programming and also allows interference checking

ENQUIRY
Mitutoyo Crysta-Apex S 500/700/900/1200 - Standard CNC CMM

High accuracy in the 1.7μm class
The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.
*ISO 10360-2:2009

ENQUIRY
Mitutoyo HIGH ACCURACY DIGIMATIC MICROMETER

0.1µm resolution measurement
Rigid frame and high performance constant force mechanism
Measuring force 7N to 9N

ENQUIRY
Mitutoyo MACH-3A 653 Series 360 In-line Type CNC CMM

CNC CMM (Horizontal type) incorporating the CMM controller and the host computer in the main unit results in a compact spacing saving footprint for the shop floor. This series is designed for 24 hour operation resulting in stable operation and remarkable durability.
Range X-23.62" (600mm), Y-19.68" (500mm) & Z-11.02" (280mm)

ENQUIRY
Mitutoyo STRATO-Apex 500/700/900 Series 355-High Accuracy CNC CMM

The STRATO-Apex series is high-accuracy CNC CMMs achieving 0.9μm for the first term. The series guarantees high accuracy and also high moving speed and acceleration achieved with improved rigid air bearings on all axial guideways. The scale systems on Mitutoyo high-precision models utilizes a high-performance linear encoder (manufactured by Mitutoyo), for detecting axis position. In addition, various technologies have been utilized in the structure, part processing, and assembly to provide high accuracy measurement .

ENQUIRY
Mitutoyo Styli and Accessories (CMM)

A wide range of contact and non-contact probes enables numerous kinds of measurement to be performed, all backed up by comprehensive analysis software for interpreting measurement results in the timely manner so essential for keeping up with today’s fast-paced production.

ENQUIRY
Mitutoyo PROFILE PROJECTORS - PJ-H30

Digital axis Counter and Projector readout counter
to facilitate dimensional and angular measurement
3 lens turret model with 10X standard magnification
Optional 5X, 20X, 50X & 100X lens
High accuracy stage

ENQUIRY
Mitutoyo CMM Fixtures

Mitutoyo offers you the full range of CMM equipment from the machine itself to probe systems, software up to clamping systems.

The Fixture series “eco-fix” offer you:
a quick, easy & flexible way to create fixtures,
practice-oriented modular concept,
time and cost-saving way to buit fixtures,
easy adaption of product changes to the fixtures,
leight-weight aluminium parts,
strong, hardcoated and anodised parts for long life under rough conditions.

ENQUIRY