Explore Our Products

Mitutoyo - Inside Measurement



You May Also Like



If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.

Mitutoyo BORE GAGE

For easy and accurate measurement of inside diameters
Longer plunger strocke with no affect on accuracy
Avaliable 0.01mm or 0.001mm Dial Indicator
Digimatic indicator is enable to upgrade the easy of operation

ENQUIRY
Mitutoyo BORE GAGE - Extra Small Holes

Extra small hole measurement
Avaliable 0.01mm or 0.001mm Dial Indicator
Digimatic indicator is enable to upgrade the easy of operation

ENQUIRY
Mitutoyo DIAL CALIPER GAGE

Ideal for comparative internal measurements.
Adjusted using a micrometer or a setting ring.
Spring loaded for practically constant measuring force throughout measuring range.

ENQUIRY
Mitutoyo DIGITAL CALIPER GAGE

Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic. Caliper Gages provide error-free LCD readings as well as data output for SPC analysis.

Technical Data
Accuracy: Refer to the list of specifications.
Resolution: .001”, .0005”, or .0002” 0.01mm, 0.02mm, or 0.005mm
Display: LCD Analog / Digital
Power Supply: AA Battery (1pc)
Battery life: Approx. 350 hours
Measuring Force: 0.7 - 1.7N

ENQUIRY
Mitutoyo INSIDE MICROMETER

Caliper Type with carbide face
Constant measuring force

ENQUIRY
Mitutoyo RING GAGES

Accessories for Inside micrometer, Holtest and bore gages
High accuracy and durability

ENQUIRY
Mitutoyo SMALL HOLE GAGE SET

Extra long for gaging deep and shallow holes,
slots and similar workpiece features
two sprung leaves are fully expanded inside
a feature that fixed the size can be measure
with outside micrometer after extraction

ENQUIRY
Mitutoyo TELESCOPING GAGE SET

A spring loaded plunger expands within a bore
and is locked in place allowing measurement
of diameter with outside micrometer after extraction

ENQUIRY
Mitutoyo THREE POINT INTERNAL MICROMETER - BOREMATIC

Snap open bore gage
Large LCD readout display
Titanium coated measuring pins
Excellent durability and impact resistance
Allow instrument to measure right to the bottom of a blind hole

ENQUIRY
Mitutoyo CRYSTA - Apex EX Series

5 axis capability creates an amazing new standard for measurement excellence. 5-axis design offers a choice of highly productive measurement methods, including “head touch” for point measurement by moving the probe head only in two axes, and high speed 5-axis touch trigger scanning.
The CRYSTA-Apex EX 500T/700T/900T series are CNC CMMs equipped with the PH20, 5-axis control touch-trigger probe.
• 5-axis operation reduces the time required for probe orientation movements and allows more flexible positioning. This also ensures easy access to complex work pieces and saves time both during programming and measurement.
• In addition to 3-axis point measurement similar to conventional coordinate measuring machines, the PH20 probe head also supports 'head touch' operation for quick point measurement using the two rotational axes of the probe only, with no movement required along the CMM axes.
• PH20 incorporates a TP20 probe and allows use of modules designed for the TP20. Automatic probe changeover with a module changer is also supported.
• Even without the workpiece to be measured, a measurement program can be created on a PC using 3D CAD data. Compared to joystick operation, this makes for more efficient programming and also allows interference checking

ENQUIRY
Mitutoyo Crysta-Apex S 500/700/900/1200 - Standard CNC CMM

High accuracy in the 1.7μm class
The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.
*ISO 10360-2:2009

ENQUIRY
Mitutoyo HIGH ACCURACY DIGIMATIC MICROMETER

0.1µm resolution measurement
Rigid frame and high performance constant force mechanism
Measuring force 7N to 9N

ENQUIRY
Mitutoyo MACH-3A 653 Series 360 In-line Type CNC CMM

CNC CMM (Horizontal type) incorporating the CMM controller and the host computer in the main unit results in a compact spacing saving footprint for the shop floor. This series is designed for 24 hour operation resulting in stable operation and remarkable durability.
Range X-23.62" (600mm), Y-19.68" (500mm) & Z-11.02" (280mm)

ENQUIRY
Mitutoyo STRATO-Apex 500/700/900 Series 355-High Accuracy CNC CMM

The STRATO-Apex series is high-accuracy CNC CMMs achieving 0.9μm for the first term. The series guarantees high accuracy and also high moving speed and acceleration achieved with improved rigid air bearings on all axial guideways. The scale systems on Mitutoyo high-precision models utilizes a high-performance linear encoder (manufactured by Mitutoyo), for detecting axis position. In addition, various technologies have been utilized in the structure, part processing, and assembly to provide high accuracy measurement .

ENQUIRY
Mitutoyo Styli and Accessories (CMM)

A wide range of contact and non-contact probes enables numerous kinds of measurement to be performed, all backed up by comprehensive analysis software for interpreting measurement results in the timely manner so essential for keeping up with today’s fast-paced production.

ENQUIRY
Mitutoyo PROFILE PROJECTORS - PJ-H30

Digital axis Counter and Projector readout counter
to facilitate dimensional and angular measurement
3 lens turret model with 10X standard magnification
Optional 5X, 20X, 50X & 100X lens
High accuracy stage

ENQUIRY
Mitutoyo CMM Fixtures

Mitutoyo offers you the full range of CMM equipment from the machine itself to probe systems, software up to clamping systems.

The Fixture series “eco-fix” offer you:
a quick, easy & flexible way to create fixtures,
practice-oriented modular concept,
time and cost-saving way to buit fixtures,
easy adaption of product changes to the fixtures,
leight-weight aluminium parts,
strong, hardcoated and anodised parts for long life under rough conditions.

ENQUIRY